Sensor Specifications: pH
Sensor Overview
The pH Pack is used to get back pH data in the form of a voltage.
Facts and Technical Specifications
Mounting: Needs stable mount in water.
Maintenance: Do not allow the pH probe to dry out. In outdoor conditions, make certain to clean off any biofouling on the probe on a weekly to monthly basis.
| pH | 0.001 to 14.000 (±0.002) |
| Probe Diameter | 12 mm |
| Temperature Range | 0-99 °C |
| Cable Length | 1 m |
| Interface | BNC connector on 50 Ω coaxial cable |
| Calibration Period | 1 year |
| Panel Footprint | 1 BNC connector |
| Current Consumption | 16 mA |
Warnings
Do not expose the pH probe to temperatures below 0 °C, or above 100 °C. Do not get the SMA connector interior wet.
Safety Instructions
Be careful with the glass interior portion of the pH probe, as it is fragile.
Design Files and Data Sheets
View the design files and data sheets for the pH Pack.
Schematics
Download the schematic file for the pH Module Board.